Google Translate

Tripp Lite DVI Over Cat5/Cat6 Active Video Extender Remote Video Receiver 1920 x 1080 200'' - 1920x1080 at 60Hz - RoHS, TAA Compliance B140-1A0

Tripp Lite DVI Over Cat5/Cat6 Active Video Extender Remote Video Receiver 1920 x 1080 200'' - 1920x1080 at 60Hz - RoHS, TAA Compliance B140-1A0
Brand: Tripp Lite
Part Number: B140-1A0
MSRP: $144.99
Availability: 10 or more
Condition: New
Price: $120.74
Qty:     - OR -   Add to Wish List
Add to Compare
Tripp Lite DVI Over Cat5/Cat6 Active Video Extender Remote Video Receiver 1920 x 1080 200'' - 1920x1080 at 60Hz - RoHS, TAA Compliance

The B140-1A0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite''s N202-Series). The B140-1A0 is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1A0 to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft.. Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..


Technical Specifications:
Connectivity Technology: Wired
Number of Input Devices Supported: 1
Number of Output Devices Supported: 1
Maximum Operating Distance: 200 ft
Graphics Modes: Full HD
Maximum Video Resolution: 1920 x 1080
Network (RJ-45): Yes
DVI Out: Yes
Number of Network (RJ-45) Ports: 1
Number of DVI Outputs: 1
Media Type Supported: Twisted Pair
Twisted Pair Cable Standard: Category 6
Receiver Height: 1"
Receiver Width: 2.50"
Receiver Depth: 3.60"
Package Contents: B140-1A0 DVI over Cat5 Active Extender Remote Unit, Mounting Hardware, Screwdriver for adjustment of Equalization, External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A), Owner's Manual
Certifications & Standards: TAA
Environmentally Friendly: Yes
Environmental Certification: RoHS
Country of Origin: Taiwan
TAA Compliant: Yes

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Partschase.com © 2024