Supermicro Motherboard Dual socket LGA 3647 Intel C622 chipset 24 DIMM slots MBD-X11DPG-O-PCIE
Form Factor / Board Size: Proprietary board, dimensions 17″ × 19.5″ (43.18 cm × 49.53 cm).
CPU Support: Dual socket LGA 3647 (Socket P). Supports 2nd Generation Intel® Xeon® Scalable Processors (Cascade Lake) and 1st Gen Intel® Xeon® Scalable. Up to 205 W TDP per processor supported. Also supports three UPI links up to 10.4 GT/s.
Chipset: Intel® C622 chipset.
Memory: 24 DIMM slots. Up to 6 TB of 3DS ECC RDIMM or LRDIMM DDR4-2933 MHz (when supported). Also supports Intel® Optane™ DC Persistent Memory in memory mode (for Cascade Lake) up to 6 TB. Memory speeds supported: DDR4-2933 / 2666 / 2400 / 2133 MT/s.
Storage & Connectivity:
8 SATA3 (6 Gbps) ports via the C622 controller.
RAID support: 0, 1, 5, 10.
M.2 interface: 1 slot, PCIe 3.0 x4; form-factors supported: 2280, 22110; Key: M-Key.
Internal ports: 2 PCIe 3.0 NVMe x4 internal ports.
Expansion: 4 PCIe 3.0 “x24” slots (i.e., full-height riser lanes) for PCIe boards.
Networking & Management:
Dual 10GBase-T LAN ports (via C622).
On-board IPMI (AST2500 BMC) for remote management.
I/O (Back Panel):
1 VGA port.
4 USB 3.2 Gen 1 ports (rear).
1 USB 2.0 port (Type A).
1 serial (COM) port.
Additional Features:
Fan headers: up to 10 × 4‐pin fan headers. PWM fan speed control.
System health monitoring: voltage, temperature, fan speeds; supports features like UID/remote UID LED, chassis intrusion header, etc.
Intended Use / Systems: This board is designed for Supermicro “SuperServer” chassis such as SYS-4029GP-TRT, SYS-4029GP-TRT2, SYS-4029GP-TRT3, SYS-6049GP-TRT etc.
Note: Because it is a proprietary board, chassis compatibility and specific wiring (power connectors, backplane, etc) must be verified. The manual states “designed to be used in an SMCI‐proprietary chassis only”.