Product Overview (Description)
Type: Fail-safe electronic output module (F-DO) for SIMATIC ET 200S distributed I/O system.
Function: 4 digital fail-safe transistor outputs with PROFIsafe safety functionality; used to control actuators/loads in safety-critical automation environments.
Safety Ratings: Up to Performance Level e (PL e) per ISO 13849-1 and Safety Integrity Level 3 (SIL 3) per IEC 61508.
Network: SIMATIC DP (PROFIBUS); can be used in PROFINET networks with IM 151-3 HF interface.
Electrical Characteristics
Load Voltage (L+): 24 V DC (rated)
Reverse Polarity Protection: No
Input Current:
• From load voltage (no load), typ. 100 mA
• From backplane bus 3.3 V DC, max. 28 mA
Power Loss (typ.): 3.5 W
Outputs
Number of Outputs: 4 digital outputs (transistor type)
Short-Circuit Protection: Yes
Load Resistance Range: 12 Ω … 1 kΩ
Switching Capacity (lamp load): max. 10 W
Output Voltage (signal “1”): ≥ L+ – 2.0 V (current sourcing)
Output Current per Channel:
• Rated: 2 A
• Permissible min.: 20 mA
• Permissible max.: 2.4 A
Residual Current (signal “0”): max. 0.5 mA
Total Output Current: max. 6 A per module
Switching Frequency
Resistive Load: max. 30 Hz
Inductive Load: max. 0.1 Hz
Lamp Load: max. 10 Hz
Diagnostics & Indicators
Diagnostics: Wire-break and short-circuit detection
Indicators:
• Group error SF (red LED)
• Output status (green LED)
Safety & Standards
Safety Performance Level: PL e (ISO 13849-1)
Safety Integrity Level: SIL 3 (IEC 61508)
Environmental & Physical
Cable Length (max): 500 m (shielded/unshielded)
Dimensions:
• Width: 30 mm
• Height: 81 mm
• Depth: 52 mm
Weight: ≈ 85 g
Isolation
Galvanic Isolation: Between digital outputs and backplane bus only (no channel-to-channel isolation)
Tested Isolation: Load voltage L+ vs backplane bus 2545 V DC