Eaton Environmental Monitoring Probe ePDU Connectivity Device - ± - 10 to 90% - ±5% Humidity Accuracy - TAA Compliance EMP001

Eaton Environmental Monitoring Probe ePDU Connectivity Device - ± - 10 to 90% - ±5% Humidity Accuracy - TAA Compliance

The optional environmental monitoring probe (EMP) is a connectivity device that enables you to collect temperature and humidity readings in the rack environment and monitor the environmental data remotely via the onboard LCD screen or remotely using a Telnet connection or a standard web browser. You can also collect and retrieve the status of two contact devices.

Technical Specifications:
Temperature Accuracy: ±3.6°F
Temperature Range: 32°F (0°C) to 158°F (70°C)
Minimum Relative Humidity: 10%
Maximum Relative Humidity: 90%
Additional Information: It can be located away from the ePDU with a CAT5 network cable up to 65.6 ft (20 m) long., The hot-swap feature simplifies installation by enabling you to install the probe safely without turning off power to the ePDU or to the loads that are connected to it., The EMP monitors the status of the two user-provided contact devices, Temperature, humidity, and contact closure status can be displayed through a web browser, a serial interface, or an onboard LCD interface, User-selectable alarm thresholds enable you to define acceptable temperature or humidity limits, Email notification through Simple Mail Transfer Protocol (SMTP), using email client software when acceptable alarm limits are exceeded or contact status changes, Changes in external contact status are logged in the ePDU event history log
Compatibility: Eaton ePDU
Country of Origin: Taiwan

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: