TrippLite SMART1500LCD 1500VA Smart Pro Digital UPS System

Specifications

• Mfr Part Number: SMART1500LCD
• Voltage compatibility: 120 VAC
• Frequency compatibility: 60 Hz
• Output:
  • Output volt amp capacity: 1500 VA
  • Output watt capacity: 900 Watts
  • Output nominal voltage: 120 VAC
  • Output voltage regulation: Battery Mode - PWM sine wave 115V +/-5%
  • Output frequency regulation: Line Mode - Passes line frequency of 60Hz +/-10%; Battery Mode - Inverter output regulated to 60Hz +/-0.5Hz
  • Outlet quantity / type: 8x NEMA 5-15R
  • Overload protection: 10A input circuit breaker
• Input:
  • Maximum input amps: 8.5 A
  • Input connection type: NEMA 5-15P
  • Input cord length: 6 ft. / 1.8 m
  • Recommended electrical service: 120V 15A
• Battery:
  • Full load runtime: 3.5 min. (900W)
  • Half load runtime: 13 min. (450W)
  • Typical battery lifespan: 4~6 years (depending on usage)
  • Battery recharge rate: 2~8 hours to 90%
• Voltage Regulation:
  • Voltage regulation description: Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 75V and overvoltages to 147V
  • Overvoltage correction: Input voltages between 128VAC and 147VAC are reduced by 12%
  • Brownout correction: Input voltages between 93VAC and 107VAC are boosted by 14%
  • Severe brownout correction: Input voltages between 75VAC and 92VAC are boosted by 30%
• Surge / Noise Suppression:
  • AC surge suppression: 480 joules
  • AC suppression response time: Instantaneous
  • Dataline suppression: Tel/DSL or Ethernet
  • EMI / RFI AC noise suppression: Yes
• Communications:
  • Network monitoring port: DB9 and USB
  • WatchDog compatibility: Compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment; ideal for unattended kiosk applications
• Line / Battery Transfer:
  • Transfer time from line power to battery mode: 2~4 milliseconds
  • Low voltage transfer to battery power: Switches to battery power as line voltage decreases to 75V or less, switches back to AC mode as line voltage increases to 79V or higher
  • High voltage transfer to battery power: Switches to battery mode as line voltage increases to 147V or higher, switches back to AC mode as line voltage decreases to 143V or lower
• Certifications: Tested to UL1778 (USA), CSA (Canada), NOM (Mexico), Class B (EMI), FCC part 68 and Industry Canada (US & Canada)
• Special Features:
  • Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
  • Appearance: Attractive black color scheme
• Physical:
  • Material of construction: ABS
  • Form factors supported: Rack/Tower
  • Cooling method: Convection
  • Dimensions (WxDxH): 3.5 x 10.5 x 17.25 inch / 8.9 x 26.7 x 43.8 cm
  • Weight (lbs): 29 lbs /13.2 kg

Write a review