Sparkle FSP300-60PLNR 300W PFC ATX12V Switching Power Supply

Specifications

• Mfr Part Number: FSP300-60PLNR
• Features:
  • 20pin Main Power connector
  • Complied with ATX and ATX12V standard
  • Active Power factor correction (PFC) meet EN61000-3-2
  • High efficiency and reliability
  • Remote On/Off function
  • Internal 12V DC fan included
  • Noise Killer (Thermal fan speed control function)
  • Low noise and ripple
  • Complies with FCC part 15 subpart J class B and CISPR 22 Class B
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested
  • Re-settable power shut down
  • Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), and CE
• Input:
  • Input Range: 90 ~ 264 V AC, Full Input Range
  • Frequency: 47 ~ 63 Hz
  • Input Current: 6A (RMS) @115V AC, 3A (RMS) @230VAC
  • Inrush Current: 60A Max for 115V AC, 90A Max for 230V AC
• Output:
  • Total Watts: 300 W
  • +5V and +3.3V total output not exceed 180W
  • +3.3V, +5V, and +12V total output not exceed 280W
• Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
• Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
• Rise Time: Less than 20ms
• Hold-up Time: 17ms minimum at nominal input voltage
• Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Less than 0.75mA at 115V AC/60Hz
• MTBF: 100,000 hours on maximum load at +25°C degree
• Dimension (WxLxH): 5.9 x 5.5 x 3.4 inch / 150 x 140 x 86 mm

Write a review