HiRO H50212 300Mbps 4-Port Wireless N Router

Specifications

• Mfr Part Number: H50212
• Features:
  • Compatible with latest ADSL standards, Including DSL, ADSL, DSL2+, ADSL2+
  • Compatible with AT&T, Verizon, SBC Yahoo!! and all major DSL ISP, Tested and Verified
  • Experience the Ultra high speed 802.11n wireless connection for up to 300Mps
  • Firewall secure routing functionality gives user a safer and cleaner internet environment.
  • Supports WPS function, one button is all you need to connects, no more type in password
• ADSL Standard:
  • ITU-T G.992.1(G.dmt)
  • ANSI T1.413 Issue 2
  • G.992.2 (G.lite)
  • G.994.1 (G.hs)
  • Auto-negotiating rate adaptation
  • ADSL2 G.dmt.bis (G.992.3)
  • ADSL2 G.lite.bis (G.992.4)
  • ADSL2+ (G.992.5)
• Software Features:
  • RFC-1483/2684 LLC/VC-Mux bridged/routed mode
  • RFC-1577 Classical IP over ATM
  • RFC-2516 PPPoE
  • RFC-2364 PPPoA
  • ITU-T 1.610 F4/F5 OAM send and receive loop-back
  • 802.1d Spanning-Tree Protocol
  • DHCP Client/Server/Relay
  • NAT
  • RIP v1/v2
  • DNS Relay Agent
  • DMZ support
  • IGMP Proxy/Snooping
  • Stateful Packet Inspection
  • Protection against Denial of Service attacks
  • IP Packet Filtering
  • QoS
  • Dynamic DNS
  • UPnP support
• Management:
  • Web-based Configuration
  • Menu-driven Command-line Interpreter
  • Telnet Remote Management
  • SNMP v1/v2/Trap
  • Firmware upgrade through FTP, TFTP and HTTP
  • Configuration backup/restore
  • Diagnostic Tool
• Wireless Standard:
  • IEEE 802.11n Draft 2.0 (MINO 2T2R) compliance. Backwards compatible with 802.11b/g
  • Supports Wifi ON/OFF switch button
  • Supports Wifi WPS switch button
  • Supports 802.11n (MIMO 2T2R) - up to 300Mbps
  • Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24, 18, 12, 9, and 6 Mbps
  • Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and 1 Mbps
  • Supports long and short preamble modes
  • Compliant transmit modulation accuracy and transmit power spectral density
  • IEEE 802.11i Security Support 64/128-bits WEP, WPA, WPA2, WPS and WDS
  • MAC Address Filter
  • Multi-SSID
  • IEEE 802.11e QoS enhancement (WMM)
• Operating Frequency/Channel:
  • USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
  • Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
  • Japan 14 Channels: 2.412GHz ~ 2.484GHz
• Ethernet LAN Protocols/Interfaces:
  • Supports 4 ports Ethernet Interface 10/100 Mbps auto selection which compliant with IEEE 802.3x standards
  • Ethernet port Support Automatic MDI/MDI-X configuration transceiver
• Hardware:
  • Interface (Depends of Different Models):
    • 1x Power jack
    • 1x Power switch for power on/off
    • 1x Reset button for reset to factory default function
    • 1x RJ11 phone jacks for ADSL connection
    • Ethernet jack for LAN port connection
    • 2x Un-detachable antenna (MIMO 2T2R)
    • Wifi ON/OFF button
    • WPS button
    • MIB II support (RFC1213)
    • Transparent bridging as specified in IEEE 802.1D
    • NAT (Network Address Translation)
    • Dynamic Host Configuration Protocol (DHCP)
    • Dynamic DNS support
    • Routing Information Protocol (RIP) v1 and v2
  • Management:
    • TFTP client and server
    • DHCP client and server
    • FTP server and client
    • Universal Plug and Play (UPnP) support
    • Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
    • Update of boot image or configuration data via TFTP/FTP
    • Syslog
    • Built-in Diagnostic Tools
    • SNMP MIB support
    • Wireless 802.11g
    • Compliant 802.11g and 802.11b
    • 2.4 GHz - 2.48GHz frequency range
    • Supports 64/128 Bits WEP and WPA
    • 54 Mbps wireless operation rate
    •  Supports Quality of Service (QoS) - 802.11e
  • Ethernet Interface:
    • IEEE 802.3
    • 10/100 Mbps
    • Ethernet interface supporting up to 64 LAN hosts
• Weight: 4.0 lbs

Write a review