Kramer 2x1 4K60 4:2:0 HDMI Auto Switcher - 4096 x 2160 - 4K - 2 x 1 - 1 x HDMI Out 20-90054190

Kramer 2x1 4K60 4:2:0 HDMI Auto Switcher - 4096 x 2160 - 4K - 2 x 1 - 1 x HDMI Out

The VS-211UHD is an automatic switcher for 4K@60Hz (4:2:0) HDMI and analog audio signals. The VS-211UHD automatically switches one of two HDMI inputs to a predefined or last connected input whenever the currently active video signal is interrupted or whenever a higher-priority video signal is detected. It also supports Kramer''s Step-in over HDMI technology. Max. Data Rate - 8.91Gbps (2.97Gbps per graphic channel) with 4K UHD support. Max. Resolution - 4K@60Hz (4:2:0). Step-In Over HDMI Technology. HDTV Compatible. Active Switching - Selectable manual or fast auto switching according to last connected or preset priority. Compliance - HDMI 1.4, HDCP and DVI 1.0. HDMI 1.4 Support - Deep Color, 3D, up to 7.1 uncompressed audio channels, ARC (supported on Input 1 only). HDMI ARC De-embedding - From output to balanced stereo audio line, uncompressed. Automatic Video Input Detection & Selection. Auto Power Off - When no HDMI input for 10 seconds (selectable). Selectable HDCP Switching. EDID Configuration Options. Default EDID. Contact Closure - For remote manual switching override. Audio Embedding/De-embedding. Analog Audio Input Per Port. Lock Button Firmware Upgrade - Over RS-232, mini-USB. Software Support - Protocol 3000, EDID Designer, K-Upload via RS-232. Varied Control Options - Front panel buttons, contact closure, IR, RS-232 Protocol 3000.

Technical Specifications:
Connectivity Technology: Cable
Number of Input Devices Supported: 2
Device Supported: Display, Computer, Speaker
Number of Displays Supported: 1
Graphics Modes: 4K
Maximum Video Resolution: 4096 x 2160
HDMI In: Yes
HDMI Out: Yes
Number of USB Ports: 1
Number of HDMI Inputs: 2
Number of HDMI Outputs: 1
Height: 1"
Width: 7.4"
Depth: 4.5"
Weight (Approximate): 14.11 oz

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: