Black Box Agility IP-Based KVM Extender - Single-Head Kit - 1 Computer(s) - 1 Remote User(s) - 328.08 ft Range - 2 x Network (RJ-45) - 5 x USB - 2 x DVI - TAA Compliance ACR1000A-R2

Black Box Agility IP-Based KVM Extender - Single-Head Kit - 1 Computer(s) - 1 Remote User(s) - 328.08 ft Range - 2 x Network (RJ-45) - 5 x USB - 2 x DVI - TAA Compliance

Configure your network for point-to-point extension, KVM switching, single-target sharing, or multicasting. Features keyboard/mouse emulation, and emulation for other standard Human Interface Devices (HIDs), such as touch screens or flash drives. Distance is only limited by your network capabilities when you use network switches. The flexible topology of the Agility gives you several extension option applications for KVM extenders. The Agility can be a KVM switch, a sharing portal, or a DVI extender; it''s up to you and how you decide to configure it. As a point-to-point KVM extender, use CAT6 cable to connect a transmitter and a receiver to deliver perfect DVI, audio, and USB. You can configure this setup to go to multiple screens at one time or add new units for additional functionality. Turn your network into a KVM matrix switch with the Agility. Create a KVM switch with as many users as you want-just keep adding receivers. With mixed channels, combine video, audio, and USB devices from different destinations. In a single-target configuration, multiple users can share a single remote computer. View-only shows only the video feed. In Share Mode, an open connection is available for all users to use the connected devices at the same time. In Exclusive Mode, one user locks out the other users, preventing them from viewing or sharing the connection, with the exception of network administrators. The Agility system multicasts video and audio over an IP network to several receiving units. The installed network switch should feature Internet Group Management Protocol (IGMP) snooping. This stops an IP switch from passing on multicast data onto every port, even if it''s not part of the Agility system. IGMP snooping reduces the amount of traffic generated by Agility transmitter units that are configured for multicast operations, and prevents performance degradation and wasted network bandwidth. Management system: iPATH The ServSwitch Agility Controller Unit offers a management suite enabling you to remotely and securely configure all the transmitter and receiver units. Define new content channels, restrict and enable access privileges, push control, disable specific USB device classes, and perform other remote configurations.

Technical Specifications:
Connectivity Technology: Wired
Number of Computers Supported: 1
Number of Remote Users Supported: 1
Maximum Operating Distance: 328.08 ft
Device Type: KVM Extender
Network (RJ-45): Yes
USB: Yes
DVI: Yes
Headphone: Yes
Microphone: Yes
Number of Network (RJ-45) Ports: 2
Number of USB Ports: 5
Number of DVI Ports: 2
Form Factor: Desktop
Transmitter Height: 1.75"
Transmitter Width: 7.90"
Transmitter Depth: 4.80"
Receiver Height: 1.75"
Receiver Width: 7.90"
Receiver Depth: 4.80"
Transmitter Weight (Approximate): 1.79 lb
Receiver Weight (Approximate): 1.79 lb
Package Contents:

Agility KVM Transmitter, Agility KVM Receiver, 2 x power adapters (one for each of the components), 2 x 6-ft. power cords, 5.7-ft. combined DVI-D and USB cable, 2 x 10-ft. 3.5-mm audio cables, 6.5-ft. serial null-modem cable F/F (upgrade cable), 8 x Self-adhesive rubber feet, Safety Guide

Environmentally Friendly: Yes
Environmental Certification: RoHS, WEEE
Country of Origin: United Kingdom
TAA Compliant: Yes

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: