HiRO H50212 300Mbps 4-Port Wireless N Router
Brand: Hiro
Part Number: FM-H50212
MSRP: $123.99
Availability: 1
Condition: New
Price: $103.00
Specifications
- Mfr Part Number: H50212
- Features:
- Compatible with latest ADSL standards, Including DSL, ADSL, DSL2+, ADSL2+
- Compatible with AT&T, Verizon, SBC Yahoo!! and all major DSL ISP, Tested and Verified
- Experience the Ultra high speed 802.11n wireless connection for up to 300Mps
- Firewall secure routing functionality gives user a safer and cleaner internet environment.
- Supports WPS function, one button is all you need to connects, no more type in password
- ADSL Standard:
- ITU-T G.992.1(G.dmt)
- ANSI T1.413 Issue 2
- G.992.2 (G.lite)
- G.994.1 (G.hs)
- Auto-negotiating rate adaptation
- ADSL2 G.dmt.bis (G.992.3)
- ADSL2 G.lite.bis (G.992.4)
- ADSL2+ (G.992.5)
- Software Features:
- RFC-1483/2684 LLC/VC-Mux bridged/routed mode
- RFC-1577 Classical IP over ATM
- RFC-2516 PPPoE
- RFC-2364 PPPoA
- ITU-T 1.610 F4/F5 OAM send and receive loop-back
- 802.1d Spanning-Tree Protocol
- DHCP Client/Server/Relay
- NAT
- RIP v1/v2
- DNS Relay Agent
- DMZ support
- IGMP Proxy/Snooping
- Stateful Packet Inspection
- Protection against Denial of Service attacks
- IP Packet Filtering
- QoS
- Dynamic DNS
- UPnP support
- Management:
- Web-based Configuration
- Menu-driven Command-line Interpreter
- Telnet Remote Management
- SNMP v1/v2/Trap
- Firmware upgrade through FTP, TFTP and HTTP
- Configuration backup/restore
- Diagnostic Tool
- Wireless Standard:
- IEEE 802.11n Draft 2.0 (MINO 2T2R) compliance. Backwards compatible with 802.11b/g
- Supports Wifi ON/OFF switch button
- Supports Wifi WPS switch button
- Supports 802.11n (MIMO 2T2R) - up to 300Mbps
- Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24, 18, 12, 9, and 6 Mbps
- Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and 1 Mbps
- Supports long and short preamble modes
- Compliant transmit modulation accuracy and transmit power spectral density
- IEEE 802.11i Security Support 64/128-bits WEP, WPA, WPA2, WPS and WDS
- MAC Address Filter
- Multi-SSID
- IEEE 802.11e QoS enhancement (WMM)
- Operating Frequency/Channel:
- USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
- Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
- Japan 14 Channels: 2.412GHz ~ 2.484GHz
- Ethernet LAN Protocols/Interfaces:
- Supports 4 ports Ethernet Interface 10/100 Mbps auto selection which compliant with IEEE 802.3x standards
- Ethernet port Support Automatic MDI/MDI-X configuration transceiver
- Hardware:
- Interface (Depends of Different Models):
- 1x Power jack
- 1x Power switch for power on/off
- 1x Reset button for reset to factory default function
- 1x RJ11 phone jacks for ADSL connection
- Ethernet jack for LAN port connection
- 2x Un-detachable antenna (MIMO 2T2R)
- Wifi ON/OFF button
- WPS button
- MIB II support (RFC1213)
- Transparent bridging as specified in IEEE 802.1D
- NAT (Network Address Translation)
- Dynamic Host Configuration Protocol (DHCP)
- Dynamic DNS support
- Routing Information Protocol (RIP) v1 and v2
- Management:
- TFTP client and server
- DHCP client and server
- FTP server and client
- Universal Plug and Play (UPnP) support
- Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
- Update of boot image or configuration data via TFTP/FTP
- Syslog
- Built-in Diagnostic Tools
- SNMP MIB support
- Wireless 802.11g
- Compliant 802.11g and 802.11b
- 2.4 GHz - 2.48GHz frequency range
- Supports 64/128 Bits WEP and WPA
- 54 Mbps wireless operation rate
- Â Supports Quality of Service (QoS) - 802.11e
- Ethernet Interface:
- IEEE 802.3
- 10/100 Mbps
- Ethernet interface supporting up to 64 LAN hosts
- Weight: 4.0 lbs
Partschase.com © 2024